Mass Air Flow and Intake Air Temperature Sensor: Installation
WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Install the mass air flow and intake air temperature sensor, and connect the connector to the mass air flow and intake air temperature sensor.
Tightening torque:
1 N.m (0.1 kgf-m, 0.7 ft-lb)
- Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >