Camshaft Position Sensor: Removal

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
Remove the air intake duct. (RH side only) < Ref. to REMOVAL , Air Intake Duct. >
Disconnect the connector (A) from the camshaft position sensor, and remove the camshaft position sensor from the chain cover.
- RH side
  
  Fig 1: Locating Camshaft Position Sensor Connector - RH Side
  Courtesy of SUBARU OF AMERICA, INC.
- LH side
  
  Fig 2: Locating Camshaft Position Sensor Connector - LH Side
  Courtesy of SUBARU OF AMERICA, INC.