Oil Pressure Switch: Installation
WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Apply liquid gasket to the oil pressure switch threads.
Liquid gasket:
THREE BOND 1324 (Part No. 004403042) or equivalent
- Install the oil pressure switch to the chain cover, and connect the connector to the oil pressure switch.
Tightening torque:
18 N.m (1.8 kgf-m, 13.3 ft-lb)
- Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >