LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Anti-Theft System - Security And Locks) >> Key Lock Cylinders >> Installation >> Front Door

Front Door

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the key cylinder.
  2. Install the cover - handle front outer.
    CAUTION: When installing the cover - handle front outer on driver's side, make sure that the key cylinder shaft is correctly inserted into the latch & actuator assembly - front.

    Preparation tool: 

    TORX® T30 

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb) 

scientia non olet · About LEMON Manuals