LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Anti-Theft System - Security And Locks) >> Front Inner Remote >> Removal

Front Inner Remote: Removal

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. < Ref. to BATTERY , NOTE, Repair Contents. >
  2. Remove the trim panel - front door. < Ref. to FRONT DOOR , REMOVAL, Door Trim. >
  3. Remove the screw, and remove the remote assembly - door.
    Fig 1: Locating Door Remote Assembly Screws
    G10272906Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals