Spot Map Light: Inspection
WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the resistance between connector terminals.
Preparation tool:
Circuit tester
Courtesy of SUBARU OF AMERICA, INC.
| Terminal No. |
Inspection conditions |
Standard |
| 5 - 6 |
Switch OFF |
1 MΩ or more |
| Switch ON |
Approx. 18 Ω |
- Replace the overhead console or stereo camera cover if the inspection result is not within the standard value.