LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Lighting System (Service Information)) >> License Plate Light >> Installation >> Sedan Model

Sedan Model

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the license plate light bulb.
    CAUTION: Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.
  2. Install the license plate light.
  3. Install the garnish - trunk. < Ref. to INSTALLATION , Trunk Lid Garnish. >

    Tightening torque: 

    4.5 N.m (0.5 kgf-m, 3.3 ft-lb) 

  4. Install the trim panel - trunk lid.
  5. Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
scientia non olet · About LEMON Manuals