LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Lighting System (Service Information)) >> Day Time Running Resistor >> Inspection

Day Time Running Resistor: Inspection

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the resistance between connector terminals.

    Preparation tool: 

    Circuit tester 

    Fig 1: Daytime Running Resistor Connector Terminal Identification
    G10277280Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Standard
    1 - 2
    2 - 3    		 Always 1.82±0.07 Ω
  2. Replace the resistor assembly - daytime running light if the inspection result is not within the standard.
scientia non olet · About LEMON Manuals