Front Speaker: Removal: Tweeter

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
Remove the trim panel - front pillar UPR. < Ref. to REMOVAL , Upper Inner Trim. >
Remove the speaker assembly - tweeter.
1. Release the clips and claws, then detach the grille speaker side.
2. Remove the screws.
  Preparation tool:
  
  Stubby screwdriver
3. Disconnect the connector and remove the speaker assembly - tweeter.
  
  Fig 1: Locating Tweeter Speaker Assembly Screws, Clips And Claws
  Courtesy of SUBARU OF AMERICA, INC.