LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (Starting System & Charging System (H6DO)) >> Battery Sensor >> Removal

Battery Sensor: Removal

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
  2. Remove the clip (A) from the battery holder.
  3. Disconnect the connector (B) from the battery sensor, and remove the battery sensor.
    Fig 1: Identifying Battery Sensor Connector And Battery Holder Clip With Nut
    G10263203Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals