LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Engine Mechanical (H6DO)) >> Ignition Timing >> Inspection >> Method With SUBARU Select Monitor

Method With SUBARU Select Monitor

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before checking the ignition timing, check the following item:
    1. Check the air cleaner element is free from clogging, spark plugs are in good condition, and hoses are connected properly.
    2. Check the malfunction indicator light does not illuminate.
  2. Warm up the engine.
  3. Read the ignition timing using Subaru Select Monitor. < Ref. to DISPLAY CURRENT ENGINE DATA , OPERATION, Subaru Select Monitor. >
    NOTE: If ignition timing is out of standard, check the ignition control system. Refer to "Engine Control System". < Ref. to BASIC DIAGNOSTIC PROCEDURE . >

    Ignition timing [BTDC/{r/min}]: 

    Standard 

    15° ± 8°/700 

scientia non olet · About LEMON Manuals