LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Engine Cooling System (H4DO)) >> Engine Coolant >> Inspection

Engine Coolant: Inspection

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: When adding the engine coolant, always use SUBARU Super Coolant.
  1. Park the vehicle on a level surface.
  2. Check the engine coolant amount, and if the coolant level is low, check for the coolant leakage, and then add the engine coolant.
    1. Make sure the engine coolant level in the reservoir tank is between "FULL" and "LOW" with the engine in a cold condition.
    2. Open the radiator cap and make sure that the radiator is filled with the engine coolant up to its filler neck position.
scientia non olet · About LEMON Manuals