Airbag Control Module: Installation

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Before installation, inspect the following items and replace any faulty part with a new part.
- Control module is deformed.
- Control module connector is damaged.
- Control module mounting bracket is damaged.
Install the airbag control module.
CAUTION: Do not reuse the bolt and nut.
Always replace with the specified new bolts and nuts.

Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)
Install the cover - shift lever and the console box assembly.
Tightening torque:

6.5 N.m (0.7 kgf-m, 4.8 ft-lb)
Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >