Inspect The Specified Position

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Measure the specified position of the stop light switch ends.
Specified position L:

3.6 mm ±0.4 mm (0.14 in ±0.016 in)

Fig 1: Measuring Specified Position Of Stop Light Switch Ends
Courtesy of SUBARU OF AMERICA, INC.
Measure the clearance between the end of the stop light switch and the stopper.
CAUTION: Be careful not to rotate the stop light switch.

Stop light switch clearance A:

1.1 mm (0.03 - 0.04 in)

Fig 2: Measuring Clearance Between End Of Stop Light Switch And Stopper
Courtesy of SUBARU OF AMERICA, INC.
Adjust the position of the stop light switch if the inspection result is not within the standard value. < Ref. to ADJUSTMENT , Stop Light Switch. >
If the stop light switch does not operate properly or it is not secured at the specified position after adjustment, replace with a new part.