LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 129 (Brake System) >> Master Cylinder >> Disassembly

Master Cylinder: Disassembly

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the reservoir tank.
    CAUTION: Be careful not to tighten a vise excessively.
    1. Place the master cylinder assembly between aluminum plates and fix it on a vise.
    2. Drive out the pin using a punch and a hammer to remove the reservoir tank.
      Fig 1: Driving Out Pin Using Punch And Hammer
      G10270001Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the seal from the cylinder body assembly.
scientia non olet · About LEMON Manuals