LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Vehicle Dynamics Control (VDC) System (Diagnostics)) >> Inspection Mode >> Procedure >> Electronic Parking Brake System

Electronic Parking Brake System

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start the engine, and operate and release the electronic parking brake a few times with the vehicle at a standstill.
  2. Check if the warning light illuminates or blinks, or DTC is displayed.
    NOTE: If the DTC is displayed, perform the diagnosis using "Diagnostic Procedure with Diagnostic Trouble Code (DTC)". < Ref. to DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC) . >
  3. Drive the vehicle at least 10 minutes, and operate and release the electronic parking brake a few times.
    CAUTION: Do not drive the vehicle with the warning light illuminated or blinked.