RH Side

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Remove the collector cover.
1. Carefully pull up the rear of collector cover at two positions (A).
2. Carefully pull up the front of collector cover at two positions (B) while moving it forward.
  
  Fig 1: Removing Collector Cover
  Courtesy of SUBARU OF AMERICA, INC.
Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
Remove the air cleaner case. <Ref. to REMOVAL , Air Cleaner Case.>
Remove the engine harness stay (A).
Disconnect the connector (B) from ignition coil.
Remove the ignition coil.
NOTE: Turn the #5 ignition coil to remove it.

Fig 2: Locating Engine Harness Stay Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove the spark plug with a spark plug socket.

Fig 3: Identifying Spark Plug With Spark Plug Socket
Courtesy of SUBARU OF AMERICA, INC.

Fig 4: Identifying Ratchet Handle, Extension Bar, Universal Joint, Spark Plug Socket
Courtesy of SUBARU OF AMERICA, INC.