LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Engine Ignition System (H6DO)) >> Spark Plug >> Installation >> RH Side

RH Side

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the spark plugs using a spark plug socket.

    Tightening torque: 

    21 N.m (2.1 kgf-m, 15.5 ft-lb) 

    Fig 1: Installing Spark Plugs Using Spark Plug Socket
    G10264256Courtesy of SUBARU OF AMERICA, INC.
    Fig 2: Identifying Ratchet Handle, Extension Bar, Universal Joint, Spark Plug Socket
    G10264263Courtesy of SUBARU OF AMERICA, INC.
  2. Install the ignition coil.
    NOTE: Turn the #5 ignition coil to install it.
  3. Connect the connector (B) to the ignition coil.
  4. Install the engine harness stay (A).

    Tightening torque: 

    T1: 6.4 N.m (0.7 kgf-m, 4.7 ft-lb) 

    T2: 16 N.m (1.6 kgf-m, 11.8 ft-lb) 

    Fig 3: Identifying Engine Harness Stay Mounting Bolts
    G10264264Courtesy of SUBARU OF AMERICA, INC.
  5. Install the air cleaner case. <Ref. to INSTALLATION , Air Cleaner Case.>
  6. Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  7. Install the collector cover.
scientia non olet · About LEMON Manuals