Inspect The Specified Position

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

If the stop light switch does not operate properly or if it is not secured at the specified position, replace with a new part.
Specified position L:

6 mm ±0.5 mm (0.24 in ±0.02 in)

Fig 1: Identifying Stop Light Switch Specified Position
Courtesy of SUBARU OF AMERICA, INC.
Measure the clearance between the threaded end of the stop light switch and the stopper.
CAUTION: Be careful not to rotate the stop light switch.

Stop light switch clearance A:

0.8 - 1.1 mm (0.03 - 0.04 in)

Fig 2: Measuring Clearance Between Stop Light Switch Threaded End And Stopper
Courtesy of SUBARU OF AMERICA, INC.
Adjust the position of the stop light switch if the inspection result is not within the standard value. <Ref. to ADJUSTMENT , Stop Light Switch.>