Front Brake Pad: Removal

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Lift up the vehicle, and then remove the front wheels.
Remove the pad - disc brake front.
1. Remove the caliper bolt on the lower side.
2. Raise the caliper body assembly and remove the pad - disc brake front.
  NOTE: Do not disconnect the brake hose from the caliper body assembly.
  
  Fig 1: Disconnecting Brake Hose From Caliper Body Assembly
  Courtesy of SUBARU OF AMERICA, INC.