Sunroof Assembly: Installation

CAUTION: Be careful not to snag the harness.

Install the sunroof bracket and the rail assembly - sunroof.
Tightening torque:

6 N.m (0.6 kgf-m, 4.4 ft-lb)
Connect the harness connector of the drain tube - sunroof and the motor assembly.
CAUTION: Insert the four drain tubes 15 mm (0.59 in) or more into the drain pipes (A).

Fig 1: Identifying Drain Pipe Dimension
Courtesy of SUBARU OF AMERICA, INC.
Install the bracket - assist rail.
Tightening torque:

7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
Install the trim panel - roof assembly. <Ref. to INSTALLATION , Roof Trim.>
Using a new TORX® bolt, install the lid assembly - sunroof.
Tightening torque:

4.5 N.m (0.5 kgf-m, 3.3 ft-lb)