Front Accessory Power Supply Socket: Installation

CAUTION: After installing the panel center assembly, check that the air vent grille of the panel center assembly is inserted correctly into the air vent duct.

Install the clip - socket.
Install the socket assembly.
NOTE: Align the groove of the clip - socket with the claw of the socket assembly.

Fig 1: Aligning Groove Of Clip
Courtesy of SUBARU OF AMERICA, INC.
Install the panel center assembly.
Connect the battery ground terminal. <Ref. to BATTERY , NOTE, Note.>
NOTE: For models other than STI model, connect the ground terminal to battery sensor.