LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System >> Spot Map Light >> Removal

Spot Map Light: Removal

  1. Disconnect the ground cable from battery. <Ref. to BATTERY , NOTE, Note.>
    NOTE: For models other than STI model, disconnect the ground terminal from battery sensor.
  2. Remove the light assembly - map.
CAUTION: When using a flat tip screwdriver, apply protective tape or cloth and be careful not to cause damage.
  1. Release the claws and remove the lens.
  2. Remove the screws.
    • Model without sunroof
      Fig 1: Locating Spot Map Light Screws - Model Without Sunroof
      G08315096Courtesy of SUBARU OF AMERICA, INC.
    • Model with sunroof
      Fig 2: Locating Spot Map Light Screws - Model With Sunroof
      G08315097Courtesy of SUBARU OF AMERICA, INC.
  3. Disconnect the connector and remove the light assembly - map and the map light bulb.
    CAUTION: Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.
scientia non olet · About LEMON Manuals