Spot Map Light: Inspection

Measure the resistance between connector terminals.

Preparation tool:

Circuit tester

Model without sunroof

Fig 1: Spot Map Light Connector Terminal Identification - Model Without Sunroof

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Standard
1 - 2	Switch OFF	1 MΩ or more
1 - 2	Switch ON	Approx. 18 Ω

Model with sunroof

Fig 2: Spot Map Light Connector Terminal Identification - Model With Sunroof

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Standard
1 - 2	Switch OFF	1 MΩ or more
1 - 2	Switch ON	Approx. 18 Ω

Replace the light assembly - map if the inspection result is not within the standard value.