Rear Height Sensor: Installation
- Install the sensor assembly - headlight beam leveler.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the rear wheels.
Tightening torque:
120 N.m (12.2 kgf-m, 88.5 ft-lb)
- Lower the vehicle.
- Connect the battery ground terminal. <Ref. to
BATTERY
, NOTE, Note.>NOTE: For models other than STI model, connect the ground terminal to battery sensor.
- Perform reinitialization of the auto headlight beam leveler system. <Ref. to
REINITIALIZATION , PROCEDURE, Auto Headlight Beam Leveler System.>NOTE: When replacing the rear vehicle height sensor with a new part, perform the initialization. <Ref. to INITIALIZATION , PROCEDURE, Auto Headlight Beam Leveler System.>