LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System >> Rear Combination Light Assembly >> Removal

Rear Combination Light Assembly: Removal

  1. Disconnect the ground cable from battery. <Ref. to BATTERY , NOTE, Note.>
    NOTE: For models other than STI model, disconnect the ground terminal from battery sensor.
  2. Remove the trunk room trim. <Ref. to REMOVAL , Trunk Room Trim.>
  3. Remove the light assembly - rear combination.
    1. Remove the harness clip and connector.
    2. Release the nuts and clips, then remove the light assembly - rear combination.
      CAUTION: Be careful not to damage the clips.
      Fig 1: Removing Rear Combination Light Assembly
      G10270715Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals