LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System >> Rear Combination Light Assembly >> Installation

Rear Combination Light Assembly: Installation

  1. Replace the gasket - rear combination with a new part.
  2. Install the light assembly - rear combination.
    CAUTION: Be careful not to catch the harness in between the parts.

    Tightening torque: 

    4.5 N.m (0.5 kgf-m, 3.3 ft-lb) 

  3. Install the trunk room trim.
  4. Connect the battery ground terminal. <Ref. to BATTERY , NOTE, Note.>
    NOTE: For models other than STI model, connect the ground terminal to battery sensor.
scientia non olet · About LEMON Manuals