LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System >> Light Control Sensor >> Removal

Light Control Sensor: Removal

  1. Disconnect the ground cable from battery. <Ref. to BATTERY , NOTE, Note.>
    NOTE: For models other than STI model, disconnect the ground terminal from battery sensor.
  2. Remove the panel COMPL - instrument UPR.
    1. Release the claws.
    2. Disconnect the connectors and remove the panel COMPL - instrument UPR.
    Fig 1: Identifying Panel Compl Claws - Instrument UPR
    G08316197Courtesy of SUBARU OF AMERICA, INC.
  3. Release the claws, and then remove the sensor - automatic light.
    Fig 2: Locating Sensor Claws - Automatic Light
    G10270681Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals