LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System >> Hazard Switch >> Installation

Hazard Switch: Installation

CAUTION: After installing the panel center assembly, check that the air vent grille of the panel center assembly is inserted correctly into the air vent duct.
  1. Install the switch - hazard.
  2. Install the panel center assembly.
  3. Connect the battery ground terminal. <Ref. to BATTERY , NOTE, Note.>
    NOTE: For models other than STI model, connect the ground terminal to battery sensor.
scientia non olet · About LEMON Manuals