Day Time Running Resistor: Installation

CAUTION: Install the mud guard - front so that the front end of the mud guard (b) comes outside the bumper face - front (a).

Fig 1: Identifying Mud Guard - Front

Courtesy of SUBARU OF AMERICA, INC.

Install the resistor assembly - daytime running light.
Tightening torque:

7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
Install the mud guard - front.
Lower the vehicle.
Connect the battery ground terminal. <Ref. to BATTERY , NOTE, Note.>
NOTE: For models other than STI model, connect the ground terminal to battery sensor.