LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Power Amplifier >> Removal

Power Amplifier: Removal

  1. Disconnect the ground cable from battery. <Ref. to BATTERY , NOTE, Note.>
    NOTE: For models other than STI model, disconnect the ground terminal from battery sensor.
  2. Remove the rear seat cushion assembly. <Ref. to REMOVAL , Rear Seat.>
  3. Remove the trim panel - rear pillar UPR and the trim panel - rear pillar LWR. <Ref. to REMOVAL , Rear Quarter Trim.>
  4. Remove the trim panel assembly - rear shelf. <Ref. to REMOVAL , Rear Shelf Trim.>
  5. Remove the power amplifier - assembly.
    1. Release the harness clips, and disconnect each connector.
    2. Remove the bolts, release the clips, and then remove the power amplifier - assembly.
      Fig 1: Locating Power Amplifier Clips - Assembly
      G10270806Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals