LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis (Single Page) >> Steering >> Power Steering >> Power Steering System (Diagnostics) >> Clear Memory Mode >> Operation

Clear Memory Mode: Operation

  1. On «Main Menu» display, select {Each System Check}.
  2. On «System Selection Menu» display, select {Power Steering System}.
  3. On «Power Steering Diagnosis» display, select {Clear Memory}.
    Display Contents to be deleted
    Clear Memory? DTC, information of trouble status, overheating protection intervention history, IGN count from overheating protection, assist limit history
  4. When «Done» and «Turn off the ignition switch.» are shown on the display screen, turn the Subaru Select Monitor and the ignition switch to OFF.
NOTE:
  • Before performing memory clear, check the current data, and if there are any data of DTC, trouble status information, overheating protection intervention history, IGN count from overheating protection and assist limit history, save them.
  • For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
scientia non olet · About LEMON Manuals