LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System (Except STI) >> Water Pipe Assembly >> Installation >> Water Pipe Assembly RH

Water Pipe Assembly RH

  1. Set the water pipe assembly RH on the engine, and connect the water pipe hose RH (B) to the oil pan upper.
  2. Install the bolt (A) which secures the water pipe assembly RH to the cylinder head RH.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb) 

    Fig 1: Identifying Water Pipe Hose RH And Bolt
    G09480755Courtesy of SUBARU OF AMERICA, INC.
  3. Connect the water hose (A) to the water pipe assembly RH, and install the bolt (B) which secures the water pipe assembly RH to the cam carrier RH.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb) 

    Fig 2: Identifying Water Hose Bolt
    G09476398Courtesy of SUBARU OF AMERICA, INC.
  4. Install the front exhaust pipe. <Ref. to INSTALLATION , Front Exhaust Pipe.>
  5. Install the oil pipe assembly. <Ref. to OIL PIPE ASSY , INSTALLATION, Oil Pipe.>
  6. Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Note.>
  7. Fill engine coolant. <Ref. to FILLING OF ENGINE COOLANT , REPLACEMENT, Engine Coolant.>
scientia non olet · About LEMON Manuals