LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft System - Security And Locks >> Security System >> Inspection >> Security System On/Off Setting

Security System On/Off Setting

NOTE: It can be set by «Security Alarm Setup» in unit customizing using Subaru Select Monitor.

For detailed procedures, refer to "PC application help for Subaru Select Monitor".

  1. Close all doors or trunk lid, and sit down on the driver's seat. Press the UNLOCK button of the keyless transmitter or access key.
  2. Turn the ignition to ON.
  3. Press the central door unlock switch and open the driver's door simultaneously. (Keep the central door unlock switch pressed down.)
  4. When the condition in step  3 continues for 10 seconds, the system switches to a mode reverse to the current mode.
Setting Horn activation Meter display
ON → OFF Twice [AL_OF]
OFF → ON Once [AL_ON]
scientia non olet · About LEMON Manuals