Accessory Relay (Push Button Start): Installation
CAUTION:
Before handling the airbag module, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". <Ref. to
CAUTION
, General Description.>
NOTE:
Make sure that there are no differences from the contents of the current settings after installation. <Ref. to
LIST
, Read Current Data.>
- Install the accessory relay.
- Install the fuse holder.
- Install the knee airbag module.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the cover assembly - instrument panel LWR driver.
- Connect the battery ground terminal. <Ref. to BATTERY , NOTE, Note.>
NOTE:
For models other than STI model, connect the ground terminal to battery sensor.