LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> Outback 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Ignition System (H4DO)) >> Spark Plug >> Installation >> RH Side

RH Side

WARNING: This page is about a different variant/trim than selected.
  1. Install the spark plugs using a spark plug socket.

    Tightening torque: 

    18 N.m (1.8 kgf-m, 13.3 ft-lb) 

  2. Install the ignition coil.
    CAUTION: Degrease the ignition coil fixing portion and the ignition coil mounting bolt.

    Tightening torque: 

    8.0 N.m (0.8 kgf-m, 5.9 ft-lb) 

  3. Connect the connector to the ignition coil.
  4. Install the air cleaner element and air cleaner case (rear). <Ref. to INSTALLATION , Air Cleaner Element.>
  5. Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
scientia non olet · About LEMON Manuals