LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> Outback 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Lubrication System (H4DO)) >> Oil Pressure Switch >> Removal

Oil Pressure Switch: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION: If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emission of smoke or causing a fire.
  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  2. Disconnect the connector (A) from the oil pressure switch, and remove the oil pressure switch from the chain cover.
    CAUTION: Catch the engine oil using cloth to prevent it from splashing.
    Fig 1: Locating Oil Pressure Switch Connector
    G10263073Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals