Oil Control Solenoid: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
Remove the air intake duct. (RH side only) <Ref. to REMOVAL , Air Intake Duct.>
Disconnect the connector (A) from the intake oil control solenoid, and remove the intake oil control solenoid from the chain cover.
- RH side
  
  Fig 1: Identifying Intake Oil Control Solenoid Connector - RH Side
  Courtesy of SUBARU OF AMERICA, INC.
- LH side
  
  Fig 2: Identifying Intake Oil Control Solenoid Connector - LH Side
  Courtesy of SUBARU OF AMERICA, INC.