LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> Outback 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Fuel Injection System (H4DO)) >> Fuel Level Sensor >> Installation

Fuel Level Sensor: Installation

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal.

CAUTION: Be sure to install the fuel level sensor harness to the clip first, then install the fuel pump harness. Otherwise, malfunction may occur.
Fig 1: Installing Fuel Level Sensor Harness To Clip First
G10262273Courtesy of SUBARU OF AMERICA, INC.