Camshaft Position Sensor: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
Remove the air intake duct. (RH side only) <Ref. to REMOVAL , Air Intake Duct.>
Disconnect the connector (A) from the camshaft position sensor, and remove the camshaft position sensor from the chain cover.
- RH side
  
  Fig 1: Locating Camshaft Position Sensor Connector - RH Side
  Courtesy of SUBARU OF AMERICA, INC.
- LH side
  
  Fig 2: Locating Camshaft Position Sensor Connector - LH Side
  Courtesy of SUBARU OF AMERICA, INC.