Malfunction Indicator Light Does Not Go Off: Trouble Symptom
Although malfunction indicator light comes on when the engine runs, DTC is not shown on the Subaru Select Monitor or general scan tool display.
DIAGNOSTICS PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK DTC. | Is DTC of engine or LAN system displayed? <Ref. to OPERATION , Read Diagnostic Trouble Code (DTC).> | Check the appropriate DTC using the "List of Diagnostic Trouble Code (DTC)". <Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) .> <Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) .> | Go to step 2. |
| 2 CHECK COMBINATION METER. Perform the self-diagnosis for combination meter system. <Ref. to SELF-DIAGNOSIS DISPLAY MODE , OPERATION, Combination Meter System.> |
Does the malfunction indicator light illuminate and go off normally? | Replace the ECM. <Ref. to ENGINE CONTROL MODULE (ECM) .> | Replace the meter case assembly of combination meter. <Ref. to COMBINATION METER .> |