LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> Outback 3.6R Limited >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks - Keyless Access (W/Push Button Start) (Diagnostics) >> Inspection Mode >> Procedure >> Inspection Mode 4

Inspection Mode 4

DTC Item Note
B2282 Vehicle Speed Signal Abnormal -
B2283 Vehicle Speed Sensor Fault Detection -

Diagnostic procedure:

  1. Prepare for the inspection mode. <Ref. to PREPARATION FOR THE INSPECTION MODE , PROCEDURE, Inspection Mode.>
  2. Drive for 20 seconds or more at a vehicle speed of 25 km/h (15.5 MPH) or more.
  3. Read the DTC and check that the DTC is not displayed.
    NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC.
scientia non olet · About LEMON Manuals