LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> Outback 2.5i >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Wiper System & Washer System) >> Combination Switch (Wiper) >> Removal

Combination Switch (Wiper): Removal

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
  2. Remove the cover assembly - column.
    1. Remove the clips, and remove the cover - column.
    2. Remove the screws by turning the steering wheel to right and left.
    3. Release the claw, and remove the cover assembly - column UPR and the cover assembly - column LWR.
      Fig 1: Removing Column Cover Assembly
      G10272380Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the switch assembly - combination wiper select.
    1. Disconnect the connector.
    2. Release the claws, and pull out the switch assembly - combination wiper select.
      CAUTION: Do not press the claws with excessive force. They may be damaged.
      Fig 2: Removing Combination Wiper Select Switch Assembly
      G10270767Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals