LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> Outback 2.5i >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Anti-Theft System - Security And Locks) >> Access Buzzer >> Removal

Access Buzzer: Removal

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
  2. Remove the access buzzer.
    1. Remove the clips, and turn over the mud guard - front.
    2. Disconnect the connector.
    3. Remove the clip and detach the access buzzer.
      Fig 1: Identifying Access Buzzer Clips
      G10273004Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals