AT Shift Lock Solenoid and "P" Range Switch: Installation

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Clean all the parts before assembly.
Insert the solenoid unit terminals to the harness connector.

Fig 1: Inserting Solenoid Unit Terminals To Harness Connector
Courtesy of SUBARU OF AMERICA, INC.
Install the solenoid unit.
NOTE:
- Insert the solenoid unit while raising the shift lock plate upward by finger, and insert the tip of cushion solenoid into the hole of shift lock plate.
- Apply 0.2 g (0.007 oz) of Multemp D to the tip of cushion solenoid.
- After installation, make sure that the tip of cushion solenoid is securely inserted in the shift lock plate by visually checking from the side of plate COMPL.
Fig 2: Locating Plate COMPL
Courtesy of SUBARU OF AMERICA, INC.

Fig 3: Identifying Cushion Solenoid And Shift Lock Plate
Courtesy of SUBARU OF AMERICA, INC.
Install the harness to the select cover COMPL.

Fig 4: Identifying Select Lever COMPL Harness
Courtesy of SUBARU OF AMERICA, INC.
Attach the harness connector.

Fig 5: Identifying Select Lever COMPL Harness Connector
Courtesy of SUBARU OF AMERICA, INC.
Install the spacer and the gasket. < Ref. to INSTALLATION , Select Lever. >
Install the select lever. < Ref. to INSTALLATION , Select Lever. >