LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> Outback 2.5i >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Lighting System (Service Information)) >> Trunk Room Light >> Removal

Trunk Room Light: Removal

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Do not remove the trunk room light if removing the bulb only.
  1. Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
  2. Remove the light assembly - trunk room.
    1. Release the claws.
    2. Disconnect the connector and remove the light assembly - trunk room.
      Fig 1: Removing Trunk Room Light Assembly
      G10277265Courtesy of SUBARU OF AMERICA, INC.
  3. Release the claws to open the bulb cover, then remove the bulb.
    CAUTION:
    • Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.
    • When using a flat tip screwdriver, apply protective tape or cloth and be careful not to cause damage.
    Fig 2: Releasing Claws To Bulb Cover
    G10277266Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals