Auto Dimmer Cancel
WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK BODY INTEGRATED UNIT SETTING. Display the data of «Auto Dimmer Cancel Setting » using Subaru Select Monitor.
NOTE:
For detailed procedures, refer to "Application help".
|
Is the setting ON (except for 0)? | Go to step 2 . | Turn the setting to ON. |
| 2 AUTO HEADLIGHT SYSTEM CHECK. Check the operation of auto headlight system. |
Is the auto headlight system normal? | Go to step 3 . | Check and repair the auto headlight system. < Ref. to AUTO HEADLIGHT SYSTEM CHECK , INSPECTION, Headlight System. > |
| 3 CHECK ILLUMINATION CONTROL SYSTEM. Check the operation of illumination control system. |
Is the illumination control system normal? | Check the body integrated unit and replace it if defective. < Ref. to BASIC DIAGNOSTIC PROCEDURE . > | Check and repair the illumination control system. < Ref. to SWITCH , INSPECTION, Combination Meter System. > |