LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> Outback 2.5i >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Vehicle Dynamics Control (VDC) System (Service Information)) >> VDC OFF Switch >> Removal

VDC OFF Switch: Removal

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. < Ref. to BATTERY , NOTE, Repair Contents. >
  2. Remove the cover assembly - instrument panel LWR driver. < Ref. to REMOVAL , Instrument Panel Lower Cover. >
  3. Release the claws and remove the VDC OFF switch.
    Fig 1: Identifying VDC OFF Switch With Claw
    G10272390Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals