LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> Outback 2.5i >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Vehicle Dynamics Control (VDC) System (Service Information)) >> Hill Hold Switch >> Installation

Hill Hold Switch: Installation

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the hill hold switch.
  2. Install the cover assembly - front. < Ref. to INSTALLATION , Console Box. >
  3. Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
scientia non olet · About LEMON Manuals