Rear ABS Wheel Speed Sensor: Installation
CAUTION:
- Be careful not to damage the sensor.
- Do not apply excessive force to the sensor harness.
- Install the rear ABS wheel speed sensor.NOTE: Check the identification (mark) on the harness to make sure there is no warpage. <Ref. to SPECIFICATION , General Description.>
Tightening torque:
Rear ABS wheel speed sensor: 7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
Rear ABS wheel speed sensor bracket (OUTBACK model only): 7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Use the clip to install the rear wheel housing.
- Install the rear wheels.
Tightening torque:
Rear wheel: 120 N.m (12.2 kgf-m, 88.5 ft-lb)
- Lower the vehicle.
- Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>